Get Connected to MITnet: Get Ready
On this page:
How to Get Started
Students
Faculty and Staff
Visitors and Alumni
Remote Access
Service Desk Note
This page and the related pages for connecting a computer to MITnet provide step-by-step instructions. These pages will help you:
- Understand the different methods for connecting to the network, depending on your MIT status;
- Obtain the proper credentials for accessing network services;
- Understand what operating systems are supported by MIT's Information Services and Technology (IS&T) department.
How To Get Started
Here are the basic requirements for connecting a computer to MITnet from a dorm, office or lab on-campus:
Step 1: Get an MIT ID number
To begin the process of creating a Kerberos username (and Athena Account), you need an MIT Card. Your MIT Card has your identification (ID) number on it. If you don't have an MIT Card, contact the MIT Card Office:
|
In-person: |
Stratton Student Center basement (W20-021) |
|
Email: |
|
|
Web: |
|
|
Telephone: |
617-253-3475 |
Step 2: Create a username
Every user must have a unique way of identifying themselves on MITnet. In technical terms, this is your Kerberos principal, or Kerberos username and password. IS&T uses Kerberos, an industry-standard protocol (developed at MIT) which provides a secure method to authenticate users on networks. Your MIT Kerberos username and password is the same as your Athena, MIT e-mail, or MITnet account.
To register for a username, use a web browser on a computer that is already on the network (a Macintosh, Windows, Linux, or Athena workstation) and go to http://web.mit.edu/register.
You may also register for a username in person at the User Accounts Office, Building N42 (211 Massachusetts Avenue). User Accounts is open for walk-ins Monday, Wednesday and Friday, 2:00 pm to 5:00 pm; Tuesday and Thursday, 9:00 am to 12:00 pm. You can contact User Accounts at 617-253-1325, or at accounts@mit.edu to schedule an appointment if you require a different time. Additional information about User Accounts is available at http://web.mit.edu/accounts.
Step 3: Confirm that your computer is running an IS&T-supported operating system
- Red Hat Enterprise Linux
- Mac OS X
- Windows
- Mobile devices (BlackBerry, iPhone, Windows Mobile)
Step 4: Confirm that you have a supported Ethernet or wireless network interface
Ethernet support consists of one of the following:
- A computer with a built-in Ethernet port, or
- A supported network interface card that provides an Ethernet port
Wireless support consists of one of the following:
- A computer with built-in wireless (Wi-Fi) networking hardware, or
- A supported network interface card that provides wireless networking
IS&T's wireless network is compatible with the 802.11b/g standard.
Students
Students living in MIT dorms can connect to MITnet via DHCP or a static IP address through a network jack located in their dorm rooms, or through wireless access. Free Ethernet cables are available from the Residential Computing Consultant (RCC) for each dorm, or from the IS&T Service Desk in Building N42, located at 211 Massachusetts Avenue.
For students living in an MIT-recognized Independent Living Group (ILG), contact the ILG's network administrator. For students living off-campus, see Remote Access, below.
Faculty and Staff
On campus, faculty and staff may connect to MITnet via DHCP or a static IP address. Users of desktop computers may wish to obtain a static, or permanent, IP (Internet Protocol) address. To obtain an IP address, first check with your departmental supervisor, network administrator, local expert or administrative officer for an available address that your group may already have. If your group does not have available IP addresses, you may request one from IS&T.
Once you have an IP address, you need to configure your computer to access MITnet. For computers which are going to be used from one stationary location on campus, such as an office or lab, there are no additional configuration steps.
Users of laptop computers who wish to connect from locations other than their offices or labs need to register the laptop for DHCP (Dynamic Host Configuration Protocol). DHCP lets a laptop automatically obtain an IP address using Ethernet or wireless in almost any building on campus, enabling the use of laptops in classrooms, libraries, auditoriums and other common areas. See the chart below.
Connection Options for Faculty and Staff
|
Computer Type
|
Desired Setup
|
Connection Options
|
Requirements
|
|---|---|---|---|
|
Desktop |
Connect to MITnet from an office or lab |
Using ethernet, via DHCP, or static IP address |
• activated network jack |
|
Laptop |
Connect to MITnet from an office or lab |
Using ethernet, via DHCP, or static IP address |
• activated network jack |
|
wireless, DHCP, or static IP address |
• within range of a wireless access point |
||
|
Connect to MITnet from any building on campus |
Ethernet, DHCP |
• supported Ethernet interface |
|
|
Wireless, DHCP |
• supported wireless interface |
Registering for DHCP
To register a laptop for DHCP, you need the following:
- A supported web browser:
- An MIT personal certificate; see Certificates at MIT for more information.
For the actual DHCP registration of the laptop, see DHCP at MIT.
Visitors and Alumni
Visitors registered with MIT, and alumni, may connect to MITnet on campus via DHCP for up to 14 days, total, per academic year.
Remote Access to MITnet
For students living off-campus, or for faculty or staff that wish to access MITnet when not on campus, there are several ways to connect to MITnet remotely. See the chart below.
Options for Connecting to MITnet from Off-campus
|
Decription
|
Disadvantage
|
Cost
|
Hardware Required
|
|
|---|---|---|---|---|
|
Tether |
• A dialup connection to MITnet |
• Slow compared to other connection methods |
No charge (included in proxy rate) |
A 56 Kbps modem |
|
iPass |
• A fee-based service for accessing the internet when traveling with a laptop in the US or internationally |
• iPass software needs to be installed |
Examples of dial-up rates per hour (subject to change): • US: $2.25 |
• Dialup requires a 56 Kbps modem |
|
3rd-party internet service provider |
• Provides a connection to the internet from off-campus locations |
• May require additional software to be installed |
• Dialup: $10 to $23 per month Rates will vary according to provider and location |
• Dialup requires a 56 Kbps modem |
A Note from the MIT IS&T Service Desk
Through our call center, email, and walk-in services, the IS&T Help Desk provides a full range of computing assistance on IS&T products and services (go to the main Support at MIT page). You can help us in our effort to support you and your computer by paying attention to the following.
Maintain Your Computer-Perform Regular Tune Ups
While we are here to help you if something should go wrong with your computer, you should also be aware that, with a little routine maintenance, you can help keep your computer running efficiently.
For Windows
If you use an MIT-supported Windows operating system, be sure to run Windows Update to install the latest critical updates, hot fixes and MIT- supported service packs. To update your machine, connect to the Internet and select Windows Update from the Start menu or use Internet Explorer and go to http://windowsupdate.microsoft.com. Be sure to install all critical patches as they are made available from Microsoft, but wait for MIT's recommendation regarding Service Packs. You may have to restart your machine several times during this process.
Another option to keep your Windows machine up to date is to use the MIT Windows Automatic Update Service (WAUS). This service enables the MIT community to utilize Microsoft's Automatic Update feature with a more conservative selection of patches focused on critical security updates, rather than those available directly from Microsoft. MIT faculty, staff, and students on MIT-owned and personal machines may use MIT's WAUS service.
More information is available online about WAUS, including instructions for subscribing and unsubscribing.
For Macintoshes
Mac OS X is configured by default to automatically check for operating-system and security updates. You may also check manually by selecting Software Update under the Apple menu.
Back Up Your Data
The importance of backing up your data cannot be stressed enough. If your hard drive fails or your computer is compromised, a backup can make a world of difference in recovering from such an event. Backups are always advised prior to updating your operating system. More information on MIT backup services is at /services/backup.
Install Anti-Virus Software
While MIT does its best to prevent virus attacks, no computer is immune to them. To encourage protection of your computer, MIT provides free VirusScan anti-virus software for Linux, Macintosh, and Windows.
For more information about virus protection at MIT, go to Virus Software.
Once installed, VirusScan is configured to update your virus definitions automatically. You can also download virus definition files (known as DAT files) from the vendor's web site. Windows users should uninstall old versions of antivirus software, such as Norton AntiVirus.
Choose Strong Passwords
Weak passwords can be guessed, thus giving someone else access to your files and your system. Create passwords that are at least eight characters long, containing numbers, upper and lower case letters, and symbols. More information is available about creating strong passwords.
How to Contact the IS&T Help Desk
The IS&T Service Desk is available to assist you. If you would like to speak with someone 'live,' our call center hours are Monday through Friday, 8 am-6 pm. You can reach us via telephone at 617-253-1101 (on campus, 3-1101) or via e-mail at computing-help@mit.edu. You may also submit a request using the web. In order to assist you, we may need to ask several questions during your call. Here are some of the questions we may ask you :
- What is your email address?
- What is your telephone number?
- What kind of computer do you have? Or printer?
- What is its hostname?
- What operating system are you running? What version?
- What service packs or updates?
- How long have you had the problem you are currently experiencing?
- What is the device's IP address?
- What is your jack number?
- What version of the software are you running?
- What are the exact error messages you are receiving, if any?
- Have you changed or installed new software or hardware?
We look forward to hearing from you, and to helping you!
Next: Get Connected
Back To Top